October 26, 2026

Phone battery fitment checklist: confirm a replacement battery matches the device

DoctorIT HQ-50N Replacement Battery Samsung

Replacement batteries are ordered by model code, but fitted by physical reference. A code that looks right on an invoice can still be wrong for the handset in front of the technician, and the mismatch usually surfaces at the bench, after the order has been paid for. A short fitment check before the order is placed is the cheapest insurance in the whole process.

This guide sets out the five checks that decide whether a replacement battery belongs in a particular device, and shows how to record the result so the same question does not have to be answered twice. It is written for wholesale buyers and repair shops that order by model code across several device families, and it works for any supplier: the checks are made against the battery in front of you, not against a catalogue claim.

Check 1: the model code and the artwork text

Short model codes are not unique across the market, and the same code can appear with different artwork, different capacity values or a different prefix. Read the model line printed on the battery itself, not only the code on the product page, and keep both in your records. Our catalogue pages follow the same convention: each reference shows the artwork text next to the catalogue code, for example SAM-HQ-50N for the HQ-50N and VO-B-G7 for the B-G7.

If the artwork text and the code on your order disagree, stop there. That is a packaging or catalogue error, and it is easier to fix before shipment than after delivery.

Check 2: capacity and nominal voltage as separate fields

Capacity and voltage are printed on the same label but describe different things. Recording them as one combined note is how a 3.85 V cell and a 3.88 V cell end up treated as the same part in a spreadsheet. The label values used across our catalogue are shown below; each one comes from the original product artwork rather than a catalogue thumbnail.

Catalogue reference Artwork text Capacity Nominal voltage Energy on artwork
HQ-50N SAM-HQ-50N 5000 mAh 3.85 V 19.25 Wh
B-G7 VO-B-G7 5000 mAh 3.85 V 19.25 Wh
BN980 SAM-BN980 4300 mAh 3.88 V 16.68 Wh
BA505 SAM-BA505 4000 mAh 3.85 V 15.40 Wh
B-G1 VO-B-G1 3700 mAh 3.85 V 14.24 Wh

Note that the charge-limit voltage printed on these artworks is a different number again, and it is not the nominal voltage. Our guide to reading a replacement battery label explains each field, including a documented case where a printed watt-hour figure does not agree with the capacity and voltage on the same label.

Check 3: connector and flex position

The connector has to sit in the same place, with the same contact arrangement, and the flex cable has to run the same way across the battery bay. This is the check that most often separates two batteries that otherwise look identical in a listing. Where a supplier can supply a photograph of the actual part from the side, ask for it; where the bay position matters to you, note it against the model so the next order is checked the same way.

Check 4: dimensions and thickness

Compare the overall length, width and thickness against the cell being replaced, including the shape of the tabs and the position of the flex exit. Small differences in thickness matter more than buyers expect: a cell that is slightly thicker may not sit under the cover, and a shorter tab may not reach the connector. Ask for the dimensions you need in writing if they are not published, and treat any figure that cannot be verified as unknown rather than as a match.

Check 5: device version and region

One model code can cover several device versions, and the differences are not always visible in a photograph. When a device family has regional or carrier variants, the fitment record should name the device version you checked, so a later order for a different variant starts from a known point rather than from an assumption. This is also where a device compatibility list earns its place: only accept a compatibility claim that is backed by the same model, artwork and physical reference you have verified.

Record the result once, reuse it for every reorder

Write the fitment result into your own record for that model, next to the label values and the approved sample reference. The sample approval checklist is built for exactly this: it captures the specification, the evidence used and the points still open, so the next order is a copy rather than an investigation. Pair it with the stock planning guide when you decide how much of that model to hold.

When you send an enquiry, state the model, the device version you need it for, and the checks you have already made. The wholesale RFQ template separates product, packaging and shipping scope so that the questions you still have stay visible in a comparison between suppliers.

Where to check a new model reference

Start with the catalogue page for the model: the DoctorIT battery catalogue lists the label values for each reference, and each product page carries the original artwork. The HQ-50N (5000 mAh, 3.85 V) and the B-G7 (5000 mAh, 3.85 V) are two examples of references where the artwork text, the capacity and the nominal voltage are stated together, which makes the fitment conversation with a supplier much shorter.

DoctorIT HQ-50N replacement battery for Samsung, artwork marked 5000 mAh and 3.85 V

Samples can be requested before a bulk order is committed, and the quotation page is the place to send a model list with quantities and destination. Availability, order minimums, delivery timing and after-sales conditions are confirmed in writing for each enquiry. Battery installation and handling should be carried out by trained technicians.

The battery evidence guide explains how to tell a printed value from a measured one, so the fitment check and the label check are not confused.

When a reference you need is not in the catalogue, the unlisted reference guide shows how to identify it from the cell and decide compatibility on physical criteria.

A cell that fits is not only a cell with the right connector: the nominal voltage and the charge-up voltage on the label decide how it charges; the charge-up voltage guide covers what to compare.