What goes into a battery price: the costs behind the unit price
A unit price is the visible part of a battery deal, and for a distributor it is usually the part that gets set first and examined last. What sits behind it — the carton that does not fill a container, the duty that depends on how the goods are described, the small percentage of units that arrive damaged, the stock that has to be held between two order cycles — is what decides whether the business earns anything. This guide is for distributors and trade buyers of replacement phone batteries who sell on to repair shops and parts counters. It walks through the cost components of a battery order, what each one depends on, how to build a landed cost per unit rather than a purchase price, and the questions that have to be answered in writing before the price can be set with confidence. It contains no prices from any supplier: unit prices, minimums, terms and freight costs are confirmed per enquiry, and the method here works on your own quotes and your own records.
The components that sit behind the unit price
| Component |
What it depends on |
Where it is confirmed |
| Cell cost |
The reference, the capacity tier and the artwork family — a packaged retail unit and a bulk cell are not the same product |
The quotation |
| Buying unit and carton quantity |
How many pieces one carton holds, and whether a mixed order can share a carton |
The quotation and the packing list |
| Freight |
Volume rather than weight, because a lithium cell is dense and light; also the number of cartons |
The forwarder’s quotation |
| Duty and tax treatment |
How the goods are described and classified on the paperwork |
The broker’s answer, in writing |
| Breakage and shortage reserve |
How much damage the route normally causes, and how that was measured rather than estimated |
Your own delivery records |
| Stock holding |
How many days of cover the references carry, and what the cash in that stock costs |
Your own stock file |
| Payment terms and currency |
How long the money is out, and what happens to the price if the currency moves |
The quotation and the invoice terms |
| After-sales and returns |
What proportion of units come back, and what happens to them |
Your own claims history |
Two of those rows are the ones most often skipped, and both are measurable rather than speculative. Stock holding is measurable because the cover per reference is already in the stock file, and the stock planning guide covers how that cover is set. Breakage and shortage is measurable because the receiving records say how many units arrived short or damaged on past shipments, and the receiving and after-sales records guide covers what has to be written down for the number to mean anything.
Unit cost is not landed cost
The calculation that matters is the one a distributor can do at the moment the order is placed: everything the goods will cost by the time they can be sold, divided by the number of sellable units that will arrive. Freight charged by volume rather than by weight is the item that most often surprises people, because a carton of lithium cells is light for its size and the space it takes is what is being paid for. A mixed order that shares a carton across references is therefore cheaper per unit than the same units split across several cartons, which is the practical reason the buying unit guide treats the carton quantity as a commercial decision rather than a packing detail.
Duty depends on how the goods are described, which is a question for the broker rather than for the supplier, and it is one of the questions in the import and broker questions guide. An answer that arrives before the invoice is signed is worth more than a discount negotiated afterwards, because the discount does not change the duty and the freight.
What the supplier’s quote does not tell you
A quotation gives a unit price, a minimum quantity and a validity period. It does not tell you how quickly a repeat order moves, what proportion of the last shipment arrived short, whether the carton quantity changes with the mix of references, or what the after-sales route actually costs in time. Those four things decide whether the price is a price or the beginning of a price.
The quote comparison guide covers how two quotations are compared when the unit prices differ, and the repeat order guide covers how the terms are captured once so that the next order is a copy rather than a re-negotiation. What belongs in the file, in other words, is the whole cost picture rather than the number on the quotation.
Setting the price you sell at
Once the landed cost per sellable unit is known, the selling price is a decision rather than a calculation, and it is worth making it explicitly rather than by applying a percentage to whatever the last quote happened to be. Three things usually determine the answer.
- What the reference does in your business. A reference that carries the volume can carry a thinner margin and still matter more than a high-margin reference that sells twice a year. The assortment guide covers how the references are grouped for this purpose.
- What you promise about the goods. If the reference is sold with a replacement promise to the customer, that promise has a cost in your reserve. If it is sold as it is, with the printed values on the label and nothing added, the cost is lower and the claim is simpler.
- What the market will bear for that specific reference. Not the market in general, but that reference, in your customers’ devices, at the price they will pay without going to somebody else. The quote comparison guide is useful here too, because the comparison that matters is not always between two suppliers of the same cell.
The packaged retail family is a special case, because the box is part of the unit and the unit is what goes on a counter: the packaged and bulk guide covers what differs between the two families, and it changes what a distributor is selling in each case.
Put the cost picture in the file
The record that makes this repeatable is short: for each order, the unit price, the carton quantity, the freight, the duty treatment, the payment terms, the number of units received short or damaged, the number of days the stock was held, and the number of units returned. With those, the landed cost per sellable unit can be recalculated after the fact instead of being argued about in advance, and the next price is set on the real number.
Nothing in that record is a secret: it is the same information the RFQ template asks for on the way in, plus what the receiving and returns records already capture on the way in and the way back. The returns procedure guide covers what has to be in hand for a claim to be settled, which is the point at which the reserve either was enough or was not.
Product pages such as the BN980 (4300 mAh, 3.88 V) and the BN985 (4500 mAh, 3.88 V) publish the artwork model text and the printed values for their references so a quotation and an order line can be written from the page, and the battery catalogue carries the rest of the range by brand and capacity tier. Send your reference list, quantities and destination through the DoctorIT quotation page, and start from the wholesale batteries page if you are setting the terms up for the first time.
Battery installation and handling should be carried out by trained technicians, and lithium-ion batteries must be stored, transported and disposed of in line with the applicable local rules and the carrier’s requirements.
Retiring a battery reference: how to wind down an old model without losing the customer
Every catalogue eventually loses a reference. A device generation ages out, a supplier stops making a cell, or a reference is superseded by one that fits more of the current devices. The hard part is not removing the page; it is doing it in a way that does not cost the customer, and that leaves a record somebody can still read a year later. This guide is for repair businesses, distributors and OEM buyers of replacement phone batteries, and it covers the three different situations that get called “retiring a reference”, what to do with the stock that is already in the warehouse, how to tell a customer about a substitution, the fields both the old and the new reference have to be checked on, and how the catalogue itself should behave when a reference’s artwork can no longer be verified. Every example used here is read from the original artwork published for that reference on this site, and calculated values are labelled as calculated.
Three different things called retirement
| Situation |
What actually happened |
What has to be true afterwards |
| The reference is discontinued |
The cell is no longer produced, and no further stock will arrive |
Existing stock is sold as the reference it is, the substitution is communicated, and the page states the position |
| The artwork changed |
The same catalogue code is now produced with different printed values or different packaging |
Both versions are recorded, the changeover is dated, and the order file can say which one it means |
| A replacement reference supersedes it |
Another reference covers the same devices |
The substitution is checked field by field, and the customer is told what differs |
The second case is the one that gets confused with the first, and it is the reason the artwork changeover guide exists: a code that no longer carries the same printed values is not the same product, even though the catalogue still calls it by the same name. When the artwork, the label values and the packaging all move together, that is a changeover and it has to be dated. When only the production has stopped, that is a retirement.
Stock that is already in the warehouse
Stock of a retired reference is still stock that was approved, and the rule that protects both the buyer and the customer is simple: it is sold as what it is. It is not relabelled under a new reference, its artwork text is not edited to match a new catalogue entry, and it is not described in a quotation with the new reference’s values.
That rule exists because the record is what a claim, a return and a customer’s own stock system are all checked against. If the old stock was sold against the old values and the paperwork says so, everything downstream can be reconciled. If it was quietly presented as the new reference, then the invoice, the label and the file disagree, and that is exactly the situation the guide to what a battery label proves warns against: a value that has been adjusted into tidiness is a value nobody can trace.
Running the remaining stock down is a commercial decision rather than a technical one, and it should be made on a fixed date rather than whenever the reference feels awkward. The stock planning guide covers how the reorder point and the cover for the references that carry the volume are set, and the assortment guide covers how a reference is retired without quietly deleting it from the assortment decision.
How to tell a customer about a substitution
A customer hears about a substitution when they ask for a reference, so the conversation happens at order time. What makes it work is that the two references are compared in writing, on the same fields, rather than described in adjectives.
- Name the old reference and the new one, and give the artwork model text for both.
- Give the capacity, the nominal voltage, the printed energy and the charge-up voltage for both, as printed.
- State the packaging family for both, since a bulk cell and a packaged retail unit are not interchangeable.
- State the fitment position, and whether it has been confirmed on a sample.
- Record the date and who the change was communicated to.
The fields in steps one to four are the same ones that belong on the order line, and the reason they matter is that a substitution can match on capacity and still differ on charge behaviour. The charge-up voltage guide covers what that difference does on a device, and the artwork prefix guide covers why the artwork text is the reliable identifier when a code alone is not.
When a reference’s artwork can no longer be verified
Occasionally a reference cannot be described accurately at all, because the artwork attached to it does not carry that reference’s model text. This happens: an image is attached to the wrong catalogue entry, or a page inherits an image that belongs to a neighbouring reference. In that case the honest answer is not to publish a plausible-looking specification, because a specification that cannot be traced back to artwork is a guess wearing a table.
What this site does in that situation is state the position on the page — that the artwork attached does not match the reference, so the capacity and voltage are not published as verified values until the correct original artwork is available. The same principle applies to a distributor’s own catalogue: an entry with unverified numbers is a claim that will eventually be checked by somebody, and it is better to have a page that says what is known.
The supplier catalogue data checklist covers what to ask a supplier when the artwork cannot be read, and the label field guide covers the fields that have to come from the artwork rather than from a data sheet.
Keep the retirement on the record
Whatever happens to the reference, five things should be written down and kept: the date; the reference and its artwork model text; what happened (discontinued, artwork changed or superseded); what was shipped to whom after that date; and where the remaining stock was. That record is what makes the next conversation with a customer — six months later, about a battery that is now old stock — answerable.
Two adjacent topics belong with it. The first is the shipment itself: if a retirement happens while stock is in transit, the paperwork still has to name the reference that was ordered, and the import and broker questions guide covers what has to travel with the goods. The second is the damaged unit: if a cell from a retired reference arrives damaged, the record of it still has to name that reference, which the damaged battery handling guide covers.
Reference pages such as the BN980 (4300 mAh, 3.88 V) and the BN985 (4500 mAh, 3.88 V) publish the artwork model text and the printed values for their references so the order line and the retirement record can be written from the page, and the battery catalogue carries the rest of the range. Send your model list, quantities and destination through the DoctorIT quotation page, and start from the wholesale batteries page if you are setting the terms up for the first time.
Battery installation and handling should be carried out by trained technicians, and lithium-ion batteries must be stored, transported and disposed of in line with the applicable local rules and the carrier’s requirements.
Charge-up voltage: the second voltage on a battery label and why it matters
A replacement battery label carries two voltages, and they are not the same number. The nominal voltage is the plateau the cell sits at while it discharges. The charge-up voltage, printed on the same block of artwork, is the voltage the cell is charged up to. They sit close together, which is exactly why the second one gets overlooked — and it is the number that decides whether a device charges a cell properly, refuses to charge it, or stops early with the percentage stuck. This guide is for repair businesses, distributors and OEM buyers of replacement phone batteries. It explains what the two printed voltages mean, what the differences look like across the references in this catalogue, what to check at the bench when a device will not charge, and why the charge-up voltage belongs in the order file next to the capacity. Every example used here is read from the original artwork published for that reference on this site, and calculated values are labelled as calculated.
Two voltages, two different jobs
The nominal voltage is the working voltage of the cell: the level it holds across most of its discharge, and the figure that pairs with the capacity to give the energy in watt-hours. The charge-up voltage is the ceiling the charging circuit brings the cell up to before it stops. On the artwork in this catalogue it is printed on its own line, labelled as the charge-up voltage or the charge-limit voltage, and it is always the higher of the two numbers.
That ordering is not a coincidence: a lithium-ion cell has to be pushed above its nominal plateau to reach a full charge, and the amount it is pushed depends on the chemistry and the cell design rather than on the device. The device’s charging circuit manages the process, and the cell’s own printed limit is the boundary it should not be pushed past.
What the catalogue actually shows
| Reference |
Family |
Nominal voltage printed |
Charge-up voltage printed |
Difference |
| BA520, BN920, BA146, WT-N30, BG977 |
Samsung, bulk cell |
3.85 V |
4.40 V |
0.55 V |
| BA217 |
Samsung, bulk cell |
3.85 V |
4.40 V |
0.55 V |
| B-B9, B-G5 |
vivo, bulk cell |
3.85 V |
4.40 V |
0.55 V |
| B-Z5 |
vivo, packaged retail |
3.85 V |
4.40 V |
0.55 V |
| HB396689ECW, HB476586ECW |
Huawei, bulk cell |
3.82 V |
4.40 V |
0.58 V |
| B-M3, B-K6 |
vivo, packaged retail |
3.87 V |
4.45 V |
0.58 V |
| HB416492EFW, HB466489EFW |
Huawei, bulk cell |
3.87 V |
4.45 V |
0.58 V |
| BS711, BS926 |
Samsung, bulk cell |
3.88 V |
4.47 V |
0.59 V |
| B-V7 |
vivo, packaged retail |
3.89 V |
4.48 V |
0.59 V |
Two things stand out. The first is that the difference between the two printed voltages is not fixed: across the references read here it runs from about 0.55 V to about 0.59 V, so it cannot be derived from the nominal voltage. The second is that both the nominal voltage and the charge-up voltage move together — a 3.89 V cell here is paired with a 4.48 V limit, and a 3.85 V cell with 4.40 V — which means that a cell with a different nominal voltage is usually a cell with a different charge behaviour as well.
What to check when a device will not charge
“It does not charge” is a symptom with several possible causes, and the battery is only one of them. The order that keeps the diagnosis honest is: check the device first, then the pack, then the cell.
- The charging path. Check the cable, the charger and the port before blaming the battery. A device that draws no current at all is rarely a cell fault.
- The pack. Check the connector and the flex, and check whether the device reports a swollen or overheated battery.
- The cell. Compare the cell’s printed nominal voltage and charge-up voltage with the reference specification for that device. A cell with a lower charge-up voltage than the device expects can leave the battery percentage stuck at a lower reading, because the charging circuit stops early.
- The measurement. With a multimeter on the battery connector, the terminal voltage while the device is on charge can be compared with the printed charge-up voltage. A reading that stays well below the printed limit points at the charging path or the device rather than at the cell.
Measurement at the connector is work for a trained technician, and the fitment checklist sets out the checks that belong before a bulk order rather than at the counter. If a cell arrives swollen, punctured or warm, the damaged battery guide comes first, because handling comes before diagnosis. The label field guide covers the rest of the printed fields and the capacity and watt-hour guide covers why the capacity and the energy need to be read together.
Why a substitution needs more than a matching capacity
Two references can carry the same capacity in milliampere-hours and still differ on the charge-up voltage, and that difference is invisible unless it is written down. A substitution that matches on capacity and artwork text but not on charge-up voltage can change how the device charges and how full the battery reads, and the symptom appears at the customer’s device rather than in your warehouse.
So the order line and the fitment record should carry the nominal voltage and the charge-up voltage together with the artwork model text, and a substitution should be checked against all three before it is fitted. The artwork prefix guide covers why the artwork text is the reliable part of the record, and the packaged and bulk guide covers the cases where two families of the same reference exist with different artwork.
For distributors: it belongs in the order file
For a distributor, the charge-up voltage is not a bench value — it is a line in the order file, because it is one of the things that has to match when the same reference is reordered. A reference list that carries the catalogue code, the artwork model text, the capacity, the nominal voltage, the charge-up voltage and the printed energy leaves nothing to interpret on the next order. The repeat order guide covers standardising that file, and the stock planning guide covers keeping the reorder point against the reference you actually sell.
For OEM and private-label work, the specification has to state the charge-up voltage as well as the nominal one, because the pack artwork is what carries it. The OEM specification sheet guide covers the fields to state, and the OEM and private label page covers the project sequence.
Product pages such as the BN980 (4300 mAh, 3.88 V) and the BN985 (4500 mAh, 3.88 V) publish the artwork model text and the printed values for their references, and the battery catalogue carries the rest of the range. Send your model list, quantities and destination through the DoctorIT quotation page, and start from the wholesale batteries page if you are setting the terms up for the first time.
Battery installation and handling should be carried out by trained technicians, and lithium-ion batteries must be stored, transported and disposed of in line with the applicable local rules and the carrier’s requirements.
Packaged retail batteries or bulk cells: what differs and how to specify each
Two families of replacement phone battery sit in this catalogue, and they are not the same product in different packaging. The artwork tells you which family a reference belongs to before anything else does: one line of model text starts with the brand prefix and carries a bilingual label with Chinese warnings, while the other starts with RP-, carries an English-only label, and comes in a printed retail box marked as a high capacity phone battery. The two families even print a different standard reference on the artwork. A buyer who treats them as one product will get the wrong buying unit, the wrong expectations for the counter, and the wrong paperwork. This guide is for repair businesses, distributors and OEM buyers of replacement phone batteries, and it sets out how to tell the families apart, what each one is actually for, what differs in the printed label, and how to write either of them into an order file so that the goods arriving match what was ordered. Every example used here is read from the original artwork published for that reference on this site.
Two artwork families, read from the label
| What the artwork shows |
Bulk cell family |
Packaged retail family |
| Model text on the artwork |
Brand prefix plus reference: SAM-, HW-, XM-, VO- |
RP- plus the same style of reference: RP-VO-B-M3, RP-VO-B-Z5 |
| Example references read here |
SAM-BN985, SAM-BG977, VO-B-G5, VO-B-B9 |
RP-VO-B-M3 (5000 mAh, 3.87 V), RP-VO-B-Z5 (4500 mAh, 3.85 V) |
| Packaging shown |
The cell itself, no retail box |
A printed retail box with a hanging tab, marked HIGH CAPACITY PHONE BATTERY |
| Label language |
Chinese and English on the same block |
English only |
| Warnings printed |
Do not disassemble, impact, squeeze or throw into fire; if there is severe swelling, do not continue to use; do not place in a high temperature environment; do not use after immersion in water |
Use only original chargers; do not disassemble or short circuit the battery; must be recycled or disposed of properly; may explode if damaged or disposed of in fire; do not push or impact |
| Standard reference printed |
GB 31241-2022 |
GB 31241-2014 |
Two things in that table are worth pausing on. The first is the warning text: the packaged family’s printed warnings are not the same words as the bulk family’s, and they are not a translation of them. A buyer who writes “the same warnings as the standard cell” into an order file is writing something the supplier cannot check against, because the artwork genuinely differs. The second is the standard reference printed on the artwork, which differs between the families. That is reported here as what the artwork shows; it is not a certification claim, and nothing on this site should be read as one.
What each family is actually for
The bulk cell is the trading unit for repair distribution. It is the form that gets counted into cartons, split into the buying units that a distributor actually orders, and handed to a technician who fits it to a device. The economics of that form are about carton quantity, how many pieces one carton holds, and how the order is split across references.
The packaged retail battery is a finished saleable unit: a cell in a printed box with a hanging tab, ready for a counter, a shelf or a parts counter in a repair shop. That is why it exists, and it is why it is priced and shipped differently. For a distributor whose customers are shops rather than benches, a packaged unit is a different commercial product even when the reference underneath it looks familiar.
The bulk and packaged buying unit guide covers how the buying unit changes what an order means and what freight and minimums follow from it, and the packaging artwork guide covers what has to be fixed in writing when a packaging detail changes.
What to check when the goods arrive
Because the families look different on the outside, receiving can check the family as well as the reference. When a carton is opened:
- Read the model text on the cell and confirm the prefix family: a brand prefix means a bulk cell, RP- means the packaged family.
- Confirm that what arrived is what was ordered in the family sense, not only in the reference sense.
- For the packaged family, check that the retail box is present and undamaged, since the box is part of the unit.
- Record which warning text version and which printed standard reference the artwork carries, so that a later batch can be compared against it.
The receiving and after-sales records guide covers the rest of the receiving routine and the record to keep when something does not match, and the label field guide covers how to read the capacity, voltage and energy fields on either family.
Writing either family into an order file
The order line has to distinguish the families, otherwise the difference is discovered at the point where it is most expensive. A workable line carries: the catalogue reference, the artwork model text including its prefix, the family (bulk cell or packaged retail), the label values (capacity, nominal voltage, the printed energy), the printed charge-up voltage, and the buying unit.
The model code itself carries no capacity information and no family information, which is the reason the prefix has to be written out rather than summarised. The model code guide covers that, and the artwork prefix guide explains why the first part of the model text is the fastest check available at receiving.
Where a reference is offered in both families, treat them as two items until the artwork text confirms which one an order line refers to. That is not a formality: the two families differ in packaging, in the printed warning text and in the printed standard reference, so an order that says only the reference has left the decision open.
For OEM and private-label work
If the pack is going to carry the buyer’s own brand rather than the original artwork, the family has to be chosen before anything is printed, because the packaging artwork is what carries the model text and the warnings. The private label project guide covers the sequence, and the OEM specification sheet guide covers the fields that a specification has to state, including the artwork model text written exactly as printed.
Product pages such as the BN980 (4300 mAh, 3.88 V) and the BN985 (4500 mAh, 3.88 V) publish the artwork model text and label values for their references, and the battery catalogue carries the rest of the range by brand. Send your reference list, quantities and destination through the DoctorIT quotation page, and start from the wholesale batteries page if you are setting the terms up for the first time.
Battery installation and handling should be carried out by trained technicians, and lithium-ion batteries must be stored, transported and disposed of in line with the applicable local rules and the carrier’s requirements.
Capacity in mAh, energy in Wh: reading the two numbers on a battery label
Two numbers on a replacement phone battery look like they measure the same thing, and they do not: one is a charge quantity in milliampere-hours, the other is an energy quantity in watt-hours. A buyer who compares only the mAh figures is comparing the wrong thing whenever two references run at different nominal voltages, and a buyer who ignores the arithmetic behind both numbers cannot tell a rounding difference from a real change in the cell. This guide is for repair businesses, distributors and OEM buyers of replacement phone batteries, and it works through what each printed number means, how to check the two against each other in seconds, what to do when they disagree, and how to compare references fairly. Every example used here is read from the original artwork published for that reference on this site, and the calculated values are labelled as calculated.
What the two numbers actually are
The artwork prints three related values in one block: the capacity as a milliampere-hour figure, the nominal voltage in volts, and, next to the capacity, the energy in watt-hours. The capacity line is printed as a typical capacity, which is a statement about a typical cell rather than a guaranteed minimum for every individual unit. The nominal voltage is the voltage the cell is designed to sit at during discharge; it is not the charge-limit voltage, which is a separate number printed a line further down.
The relationship between the three is simple enough to check by hand: watt-hours are roughly milliampere-hours multiplied by volts, with the milliampere-hours converted to ampere-hours first. So 4500 mAh at 3.88 V is about 4.5 × 3.88, which is 17.46 Wh. Any buyer can do this in ten seconds with a calculator, and it turns a printed claim into something checkable.
The check, worked on real references
| Reference |
Capacity printed |
Nominal voltage printed |
Energy printed |
Calculated from the two printed values |
| BS711 (Samsung) |
4500 mAh |
3.88 V |
17.46 Wh |
17.46 Wh — consistent |
| BA146 (Samsung) |
5000 mAh |
3.85 V |
19.25 Wh |
19.25 Wh — consistent |
| B-G5 (vivo) |
4000 mAh |
3.85 V |
15.40 Wh |
15.40 Wh — consistent |
| BG977 (Samsung) |
4500 mAh |
3.85 V |
17.33 Wh |
17.33 Wh — consistent |
| BM4T (Xiaomi) |
4520 mAh |
3.87 V |
17.40 Wh |
17.49 Wh — 0.5% above the printed value |
| HB396689ECW (Huawei) |
4000 mAh |
3.82 V |
15.30 Wh |
15.28 Wh — rounding level |
Two of these need a word of explanation, because they are the cases that come up in practice rather than the tidy ones. A difference of a few hundredths of a watt-hour, as on the Huawei reference, is what rounding does: the printed value was rounded to two decimal places in a direction that differs from a straight multiplication. A difference of a few percent, as on the Xiaomi reference, is a different thing: the printed energy and the printed capacity do not come from the same measurement basis, so neither number is wrong on its face and neither should be quietly adjusted.
What to do when the two do not agree
There are three possible explanations, and they need different responses.
- Rounding. Check whether the printed energy is within a rounding step of the calculated value. If it is, record it as rounding and move on.
- Different measurement basis. Capacity and energy are not always measured the same way, and a typical capacity can differ from a rated one. The honest response is to write down both printed values as they are, with the calculated value marked as calculated, and not to present one of them as corrected.
- A change in the cell or the artwork. If the artwork text, the capacity and the energy change between batches, that is a changeover rather than a rounding case, and it needs to be recorded against the batch. The artwork changeover guide covers how to handle that.
What to avoid is the tempting move of “correcting” the published number to make the arithmetic tidy. A catalogue value that has been silently adjusted is a value nobody can trace, and it is exactly the kind of change that makes a later claim unanswerable. The guide to what a battery label proves sets out why the printed artwork is the record and the calculation is only a check on it.
Why watt-hours are the fairer comparison
Two references can be listed in the same order and carry very different amounts of energy. Take 4000 mAh at 3.85 V, which is 15.40 Wh, against 4500 mAh at 3.88 V, which is 17.46 Wh: the second cell carries roughly 13% more energy, while the mAh figures differ by 12.5% and the two are running at different voltages. Across a catalogue the gap widens, because the nominal voltage in this range moves between about 3.82 V and 3.88 V depending on the cell.
So when a buyer is comparing two references for the same device, or deciding how much energy a customer is really getting, the watt-hour figure is the one that answers the question; the milliampere-hour figure only answers it when both cells run at the same voltage. The label field guide sets out the rest of the printed fields, including the charge-limit voltage and the warnings, and the model code guide covers why the code itself carries none of this information.
What capacity does not tell you
A capacity number is not a fitment statement, a life statement or a quality statement. It does not say which device version the cell fits, how many cycles it will survive, or how it was manufactured. Two cells with identical printed values can behave differently, which is why the acceptance decision is made on a sample and a dated record rather than on a photograph. The sample approval checklist covers that decision, and the cycle life and shelf life guide covers what happens to a cell over time. If a cell arrives swollen, punctured or warm, the damaged battery guide covers the handling, which comes before any of these questions.
Put the three numbers in the order file
The practical step is to make the check part of the record rather than a one-off calculation. Each order line should carry the reference, the artwork model text, the printed capacity, the printed nominal voltage, the printed energy and, where the two disagree, a note that the calculated value has been recorded as calculated. With that in place, a change between batches is visible, a claim has something to point at, and the next order is a copy rather than a re-derivation.
Reference pages such as the BN980 (4300 mAh, 3.88 V) and the BN985 (4500 mAh, 3.88 V) publish the artwork model text and the printed values for their references so the order line can be written straight from the page; the battery catalogue carries the rest of the range. Send your model list, quantities and destination through the DoctorIT quotation page, and start from the wholesale batteries page if you are setting the terms up for the first time.
Battery installation and handling should be carried out by trained technicians, and lithium-ion batteries must be stored, transported and disposed of in line with the applicable local rules and the carrier’s requirements.
Depth or breadth: how a distributor should build its battery assortment
Every distributor eventually faces the same two questions: how many battery references should the catalogue carry, and how deep should the stock go on each of them? Answer them by instinct and you end up with a warehouse full of references that never sell and an empty shelf for the ones that sell every week. Answer them with a method and you get an assortment that matches how the business actually earns. This guide is for distributors and trade buyers of replacement phone batteries, and it sets out how to build an assortment from your own demand rather than from a supplier’s catalogue size, how to trade depth against breadth, how to avoid the two classic failures — dead stock and stock-outs on the references that matter — and how to keep the assortment alive as demand moves. It contains no figures from any supplier: pricing, minimums and availability are confirmed per enquiry, and the method here works on your own records.
Start from demand, not from the catalogue
The wrong starting point is the supplier’s catalogue, because it is a list of what they can make rather than a list of what your customers ask for. The right starting point is the reference list you have already sold, over a period long enough to be meaningful. From that list you can separate two things that look identical in a spreadsheet: references that sell steadily and in quantity, and references that sell slowly and occasionally. The first kind earns its place through volume; the second earns its place through coverage — a customer who cannot get one reference does not necessarily place the rest of the order elsewhere.
Write the reference, the units sold, and the number of separate orders, per period. The order count matters as much as the unit count, because a reference that appears in many small orders is a different proposition from one that appears in a few large ones: it occupies shelf space, it needs a reorder point, and it is the reference a customer will complain about when it is missing.
Depth and breadth are the same decision
| Dimension |
Deep and narrow |
Broad and shallow |
| Cash tied up |
Concentrated in a few references |
Spread thinly across many |
| Stock-out risk |
Low on the covered references |
Higher on every reference |
| Dead stock risk |
Low if the references genuinely sell |
High on the slow tail |
| What it needs to work |
Reliable demand for those references and a supplier who can repeat them |
A catalogue large enough that the slow references are still available when needed |
| What it looks like when it fails |
A gap on the reference that earns the most |
A warehouse of models nobody asks for |
The table is the argument for working both at once: a small group of references carried deep, and a longer tail carried shallow so that coverage is preserved without cash being spent on it. The mistake is doing only one of the two — a pure deep assortment cannot answer a request for a reference outside the top group, and a pure broad assortment turns the inventory into a museum.
What a shallow tail needs from the supplier
Carrying a reference thinly only works if you can reorder it without a long wait, and that depends on terms rather than on hope. Three things determine whether a tail reference is viable: the minimum quantity per order, whether it can share a carton with other references, and how quickly a repeat order moves. The quote comparison guide covers how to get those terms stated in writing, and the buying unit guide covers how the packaging unit affects both the freight and the minimum you have to hold.
If a supplier cannot state those three things, the tail is not a tail, it is a hope. That is a fair question to put in the enquiry, and the answer belongs in the file with the rest of the terms.
Use the order file, not a spreadsheet of guesses
The assortment is only as good as the record behind it. Once references have been counted by units sold and by order count, the next step is to make that record the thing you actually order from: one line per reference, with the artwork model text, the buying unit and the label values, so the order file and the demand record are the same file. The repeat order guide sets out how to standardise that file after the first order, and the stock planning guide covers how to size the depth per reference against consumption.
The device mix is the other half of the assortment question. A distributor whose customers repair mostly one brand does not need the same range as one whose customers bring everything, and the catalogue here is organised by brand precisely so that the demand record can be organised the same way. The device list guide covers building the demand side of the list, and the mixed-model order list is the format that keeps every reference and its artwork text on one line.
The two classic failures
Dead stock. A reference that has not sold within the period you set is either a coverage decision or a mistake. If it is genuinely requested occasionally, keep it shallow; if it has not been requested at all, it is not an assortment, it is clutter — and it is holding cash and shelf space that a slower reference with real demand could use. Setting the period in advance is what stops this from being a matter of mood.
Stock-outs on the references that matter. This is the expensive failure: the reference that carries the volume is the one that must never be missing, and a shallow assortment makes it missing exactly when a shipment is delayed. The stock planning guide covers setting the cover for the references that carry the volume, and the receiving and after-sales records guide covers keeping the record that tells you how quickly a repeat order actually moves.
Keep the assortment alive
Demand moves, and an assortment built once is stale within a season. Two habits keep it alive. The first is a periodic review on a fixed date — not whenever a reference looks awkward — where the demand list is rebuilt and the depth, the coverage and the tail are each decided explicitly. The second is a rule for what happens when a reference is discontinued or when its artwork changes: the change is recorded, the stock is worked down, and the listing text is updated once, dated, rather than quietly substituting one artwork for another under the same code. The artwork changeover guide covers that case, and the catalogue data guide covers what to ask a supplier so that a change is visible before a shipment arrives.
Product pages such as the BN980 (4300 mAh, 3.88 V) and the BN985 (4500 mAh, 3.88 V) publish the artwork model text and label values for their references so the order file and the listing can be written from the page; the battery catalogue carries the rest of the range, organised by brand and capacity tier. Send your reference list, quantities and destination through the DoctorIT quotation page, and start from the wholesale batteries page if you are setting the terms up for the first time.
Battery installation and handling should be carried out by trained technicians, and lithium-ion batteries must be stored, transported and disposed of in line with the applicable local rules and the carrier’s requirements.
Handling a swollen or damaged battery: what a repair business and a distributor should do
A swollen battery is not a warranty question first; it is a handling question first. The order of those two matters: the handling decides whether anyone is hurt and whether the unit can still be examined, and the warranty question cannot even be opened until the handling has been done properly and the evidence exists. Repair shops and distributors both meet damaged cells — a device arrives with a swollen pack, a carton turns up with one punctured unit, a customer returns a battery that has been left in a hot car. This guide is for repair businesses, distributors and OEM buyers of replacement phone batteries, and it sets out what to do, what not to do, and what to record, in the order those things need to happen. It is written from the warnings printed on the original artwork of the references in this catalogue, and it does not state any specific regulation: the applicable local rules and the carrier’s requirements are what govern storage, transport and disposal, and they differ by country.
What the artwork itself warns about
Every original artwork image behind the references published here carries the same set of printed warnings, in English and Chinese: do not disassemble, impact, squeeze or throw into fire; if there is severe swelling, do not continue to use; do not place in a high temperature environment; do not use batteries after immersion in water. The label also carries disposal and recycling marks and a crossed-out bin symbol.
Those warnings are not decoration on the cell; they are the manufacturer’s statement of what makes a lithium-ion cell dangerous to handle. The rest of this guide is how a workshop or a warehouse turns that statement into a procedure.
Triage: condition, action, record
| What you find |
Immediate action |
What to record |
| Visibly swollen cell, device still closed |
Do not charge, do not open the device, do not press the cell. Move the device to a place where it cannot be knocked or heated |
Model, date, who found it, where it was found, photographs |
| Cell removed and visibly swollen |
Do not puncture, squeeze or bend it. Keep it away from heat and from anything that could be damaged by a leak |
Same, plus the reference and the batch if visible |
| Punctured, torn or crushed cell |
Do not handle more than necessary, do not try to neutralise it yourself, do not put it in a sealed container |
Condition, photographs, location, time |
| Cell wet after immersion |
Do not use it, do not charge it, do not ship it in the same consignment as saleable stock |
What it was immersed in, how long, condition |
| Warm cell, unusual smell, hissing |
Keep clear, do not fit, do not charge, and move the area to a safe distance from stock |
Time of discovery, position, batch, stock that was nearby |
| Cosmetic damage only, no swelling |
Hold the unit out of saleable stock and ask the supplier before fitting it |
Reference, batch, photographs, the reason it was held |
The last row is the one most often skipped, and it is the one that protects a claim: a unit that is only cosmetically damaged has usually been through a process that damaged it — dropped, crushed in a carton, or installed and removed badly — and that is worth knowing before it goes near a customer’s device.
What a repair shop does with the device
When a device arrives with a swollen pack, the customer’s device is the priority and the battery is evidence. Take the device out of charge, do not connect a charger, and do not attempt to remove the cell if the device is flexed or hot. Photograph the device as it was received before anything is opened, because that image is often the only record of how the pack was sitting when the customer brought it in.
A used cell is not a damaged cell, and the two should not be treated the same way. A cell that has completed a number of cycles is a normal return or a normal resale, and the cycle life guide explains what to expect from a cell over its life. A cell that is swollen, punctured, wet or hot is a safety case, and it follows the handling above rather than the warranty route.
Where the device has been in a customer’s hands, what you tell them should be about what you did and what you found, not about what will be replaced. Replacement terms come from the supplier and are confirmed per order, so they should not be promised at the counter. The returns procedure guide covers the claim route for the supplier side of it.
What a distributor does at receiving
Damaged units arrive inside otherwise good consignments, which is why the receiving routine has to include them rather than only counting cartons.
- Keep the unit out of saleable stock and separate from the rest of the carton.
- Photograph it in place before moving it, and photograph the packaging.
- Record the reference, the artwork model text, the batch reference if it is printed, the quantity affected and the condition.
- Check the rest of the same carton and the same batch, because damage in transit usually affects more than one unit.
- Notify the supplier in writing with the record and the photographs attached.
The receiving and after-sales records guide covers the checks and the record format, and the artwork changeover guide covers the case where a later batch arrives with different artwork — which is one of the few things that makes a damaged unit traceable to a shipment rather than to a guess.
Transport and disposal
A damaged or swollen cell is not ordinary freight. Carriers and forwarders have their own rules about damaged or dangerous goods, and a consignment that contains one will be handled differently or refused. Before anything leaves your premises, check what the carrier requires and what the applicable local rules require, and say plainly in the enquiry to the supplier that the unit is damaged rather than describing it as a return.
For disposal, the artwork carries the disposal and recycling marks and the crossed-out bin symbol, which means the cell is not for household waste. The correct route for a damaged cell differs by country and by who holds it — a workshop, a warehouse, a collector — so the practical step is to check the local collection and disposal route for lithium-ion batteries rather than to assume one. The shipping and storage guide covers the general handling and transport side for undamaged stock.
What to keep as evidence
For every damaged unit, keep: photographs of the unit and of the packaging; the reference and the artwork model text; the batch or lot reference; the quantity affected; the date and the location of discovery; the condition in words; and the exchange with the supplier. That set is what turns “we received a damaged battery” into a claim that can be settled, and it costs a few minutes at the moment the unit is found.
Reference pages such as the BN980 (4300 mAh, 3.88 V) and the BN985 (4500 mAh, 3.88 V) publish the artwork model text and the printed warning set for their references, so the order line and the record can be written from the page; the battery catalogue carries the rest of the range. Send your model list, quantities and destination through the DoctorIT quotation page, and start from the wholesale batteries page if you are setting the terms up for the first time.
Battery installation and handling should be carried out by trained technicians, and lithium-ion batteries must be stored, transported and disposed of in line with the applicable local rules and the carrier’s requirements.
Why the prefix on a battery label matters: SAM, HW, XM and VO
The model text printed on a replacement phone battery is not one string; it is usually a short prefix followed by a reference. The prefix identifies the device family the artwork belongs to, and it is the fastest sanity check a buyer has. If the prefix on the cell in your hand does not belong to the brand family of the reference you ordered, nothing else on the label matters, because the goods are not what you ordered. This is not a theoretical problem: in this catalogue, one reference has an attached artwork image that carries a different family’s model text, and the page for it says so rather than publishing a specification that cannot be verified. This guide is for repair shops, distributors and OEM buyers of replacement phone batteries, and it explains what the prefix can tell you, what it cannot, how to use it as a receiving check, and what to do when the prefix is not there at all.
The prefixes on the original artwork in this catalogue
| Prefix on the artwork |
Brand family it identifies |
Example from this catalogue |
| SAM- |
Samsung |
SAM-BN985, SAM-BA520, SAM-BS711 |
| HW- |
Huawei |
HW-HB416492EFW, HW-HB476586ECW |
| XM- |
Xiaomi |
XM-BM4T, XM-BM4U |
| VO- |
vivo |
VO-B-B9 |
These are the prefixes seen on the original DoctorIT artwork for the references published here, read from the artwork images themselves. They are not a universal standard: other suppliers print their own brand, their own part numbers, or nothing in that position at all. What makes the prefix useful is that within a catalogue it is consistent, which means it can be checked in seconds rather than interpreted.
What the prefix tells you, and what it does not
The prefix tells you which device family the artwork was produced for. That is genuinely useful, because device families are where errors cluster: a reference gets copied into the wrong brand group, a supplier sends the artwork for the wrong family, or a catalogue image is replaced with the image of a neighbouring reference. In each of those cases the prefix is the first thing that is wrong, and it is visible before anyone opens a box.
What the prefix does not tell you is anything about fitment. It says nothing about capacity, nothing about voltage, nothing about which device version the cell fits, and nothing about whether the reference exists in more than one form. A prefix that matches the expected family is a necessary check, not a sufficient one. The capacity, the nominal voltage and the charge-limit voltage still come from the label fields explained in the battery label guide, and the fitment question still has to be settled physically as set out in the fitment checklist.
How to use the prefix as a receiving check
The check costs a few seconds and it belongs at the point where a carton is opened rather than at the point where a cell is fitted.
- Read the model text on the cell and split it into the prefix and the reference.
- Compare the prefix with the brand family your order line says the reference belongs to.
- If the prefix does not match, stop there and query the supplier before the goods go on the shelf.
- If it matches, continue with the label values and the physical checks as usual.
Step three is the point of the exercise. A mismatch caught at receiving is a query about a shipment; the same mismatch found at the bench is a customer whose phone is open on the counter. The receiving and after-sales records guide covers the rest of the receiving routine and the record that has to be kept when something does not match.
When the prefix is missing or different
Two situations are common enough to plan for. The first is a supplier whose artwork carries their own brand in that position, so the prefix tells you the supplier rather than the device family. The second is a catalogue whose images are renders rather than original artwork, in which case there is no printed text to read at all.
Neither situation is a reason to stop ordering, but both change the verification route. If the artwork carries a supplier brand, the family has to come from somewhere else: the order line, the packaging, the documentation set, or the reference itself, and it should be recorded in the order file so the next order does not have to work it out again. If there is no readable artwork, then the label values on the goods are the only record, and they should be captured at the first receipt rather than assumed. The catalogue data guide covers what to ask a supplier when the images cannot be read, and the artwork changeover guide covers the case where the artwork text changes between batches.
Record the artwork text, not just the code
Once you have started reading prefixes, the natural step is to write the full artwork text on the order line rather than only the short code. The prefix then becomes part of the record, and a change in it is a visible event rather than something noticed later. This is the same practice the model code guide argues for with the rest of the code: the numeric part carries no capacity information, and the artwork text is the field that survives a rebrand, a catalogue tidy-up and a supplier change.
Product pages such as the BN980 (4300 mAh, 3.88 V) and the BN985 (4500 mAh, 3.88 V) publish the artwork model text for their references so that the order line can be written directly from the page; the battery catalogue carries the rest of the range.
Send your model list, quantities and destination through the DoctorIT quotation page, and start from the wholesale batteries page if you are setting the terms up for the first time. Availability, order minimums, timing and after-sales conditions are confirmed in writing for each enquiry and each shipment, against the scope you send.
Battery installation and handling should be carried out by trained technicians, and lithium-ion batteries must be stored, transported and disposed of in line with the applicable local rules and the carrier’s requirements.
After the first order: how to make your second battery order faster and safer
Most battery buyers spend a great deal of care on the first order and then improvise the second one. The first order is checked properly: samples are approved, the artwork is photographed, the fitment is confirmed, the shipment is counted and recorded. Then a second order arrives, it is typed from memory, the reference list has been edited in a hurry, and two things quietly go wrong — a reference is ordered under a slightly different name, and a unit that used to be a box of ten is now a box of five. Neither mistake is visible on the invoice, and both are found at the bench, or by the customer. This guide is for repair shops, distributors and OEM buyers of replacement phone batteries, and it sets out what to standardise after the first order so that every order after it is faster, cheaper to place and easier to check. It is the operational counterpart to the stock planning guide, which covers how much to hold: this one covers how to order the second time without re-learning everything.
What to standardise after the first order
| Item |
Standardise it as |
What it prevents |
| Reference line |
Catalogue code plus the artwork model text, on one line |
Ordering one reference under a name that no longer matches the label |
| Buying unit |
One stated unit per reference, with what is inside it |
A carton arriving in a format the receiving routine was not set up for |
| Label values |
Capacity, nominal voltage, charge-limit voltage and the printed watt-hour figure |
Accepting a shipment whose label does not match the approved sample |
| Order file |
One line per reference with quantity, destination and delivery term |
Re-typing the order and introducing a typo in a model code |
| Shipment record |
Date, batch reference, quantities received and counted, condition |
Being unable to trace a faulty unit back to a shipment |
| Contact and terms |
One named contact, the agreed delivery term, currency and price validity |
Re-negotiating the same terms on every order |
None of these rows is complicated, and all of them are decided once. The value is that the second order is then a copy with the quantities changed, which is exactly what makes it cheap.
Keep the reference line exactly as it is
The single most common source of trouble is a reference line that drifts: “BN950” becomes “bn950 battery”, then “Samsung BN950 3300”, then a note in someone’s head. Each version may be understandable to a person, but only one of them matches the code on the invoice, the code in the catalogue and the code printed on the artwork. The fix is to keep the catalogue code and the artwork model text together on every line, exactly as they appear on the product page, and to change them only through the order file rather than by typing over them.
The mixed-model order list exists for this: one line per reference, one column for the code, one for the artwork text, one for quantity, one for the destination. It is a file you copy for the next order, not a form you fill in from scratch. The model code guide explains why the numeric part of a code carries no capacity information, which is the reason the artwork text has to travel with it.
Fix the buying unit once
After the first shipment you know what a unit actually is: whether it is loose, bagged or boxed, how many units are in a carton, and what else is in it. Write that down once, next to the reference. It is what tells you whether a later shipment is the same goods or a different format with the same code, and it is what the buying unit guide explains about freight, handling and traceability.
If a supplier changes the unit format, that is worth catching before the shipment is booked rather than at receiving, which is why the question belongs in the order file and not in a memory.
Make the receiving record the thing you can search
The second-order advantage comes from having the first shipment’s record in a form you can look things up in. Four fields do most of the work: the date, the batch or lot reference, the quantities received and counted, and the condition on arrival. With those, a faulty unit can be traced to a shipment and a batch; without them, a claim is an argument about memory.
The receiving and after-sales records guide sets out the checks and the record format, and the artwork changeover guide covers what to do when a later batch arrives with artwork that differs from the approved one — which is exactly the situation the batch field makes detectable.
Standardise the terms so the order is one message
The commercial part of an order is also worth writing down once: who the contact is, which delivery term applies and to which place, which currency the price is in, how long the price is held, and the payment milestones. When these are already agreed, the second order only needs to confirm the quantity and the destination, and any change to the terms becomes visible as a change rather than as a silence.
The quote comparison guide
covers why a quote has to state these fields before two quotes can be compared, and the wholesale RFQ template is the format that keeps them on the same line for every supplier.
Review the file, not the market
Once the order file is standardised, the review you need each cycle is short: confirm that every reference still exists in the catalogue, that no reference has been quietly swapped for a different artwork, that the unit format has not changed, and that the quantities match what the shelf actually needs. The stock planning guide covers sizing the quantities; the sample approval checklist covers the case where a reference does change and a new sample has to be approved before the next order.
Reference pages such as the BN980 (4300 mAh, 3.88 V) and the BN985 (4500 mAh, 3.88 V) publish the artwork model text and label values for their references; the battery catalogue carries the rest of the range.
Send your model list, quantities and destination through the DoctorIT quotation page, and start from the wholesale batteries page if you are setting the terms up for the first time. Availability, order minimums, timing and after-sales conditions are confirmed in writing for each enquiry and each shipment, against the scope you send.
Battery installation and handling should be carried out by trained technicians, and lithium-ion batteries must be stored, transported and disposed of in line with the applicable local rules and the carrier’s requirements.
How to compare battery quotes: the costs a unit price hides
Two suppliers quote the same battery reference at different unit prices, and the lower number is often the one that costs you more once the goods have landed. A unit price is the visible part of a quote; the rest is freight by volume rather than by weight, duties, payment terms, the cost of the stock you have to hold, the labour of putting a mixed shipment away, and the cost of the small percentage of units that arrive damaged, short or mismatched. This guide is for repair shops, distributors and OEM buyers of replacement phone batteries, and it explains how to turn two quotes into a comparison you can act on, what a quote has to state for the comparison to be valid at all, and which costs are worth chasing and which are not. It contains no prices from any supplier: pricing is confirmed per enquiry, and the point here is the structure of the comparison rather than any particular figure.
The costs a unit price hides
| Cost element |
What it depends on |
How to settle it in writing |
| Cell price |
Reference, order quantity, and how the order is mixed across references |
Price per reference at the quantity you are actually ordering |
| Freight |
Weight and volume of the shipment, and the packaging unit |
The delivery term named on the quote, and the charge per shipment |
| Duties and taxes |
Destination country and the tariff classification of the goods |
Who settles them, and what documentation is issued |
| Payment and currency |
Payment terms, the currency, and how long the rate is held |
The currency, the payment milestones, and the period the price is valid for |
| Packaging unit |
Whether cells arrive loose, bagged, or in printed boxes |
What is in a unit, and how many units per carton |
| Minimums and mix rules |
Per-reference minimums and whether references can share a carton |
Minimum quantity per reference, and whether mixed cartons are allowed |
| Short or faulty units |
Transit handling and the claim route |
The replacement or credit route, and the evidence it needs |
| Stock depth |
Lead time against your own consumption rate |
How long the quote assumes you can cover demand |
| Your own time |
Receiving, checking, labelling and re-binning a mixed shipment |
Not a supplier term — this one is yours to measure |
The last row is the one buyers forget. A mixed consignment of forty references does not take forty times as long to put away as a carton of one reference does; it takes something closer to one carton plus forty small checks, and the receiving procedure is what makes that true. The receiving and after-sales records guide covers the checks that have to happen anyway, and the buying unit guide covers how the packaging unit changes both the freight and the handling.
A landed cost you can compare
Most buyers already have a landed-cost figure somewhere in their head. The problem is that it is rarely written down in the same form for two suppliers, so the comparison happens on unit price alone. Write it down once, per quote, in the same order:
- Cell price for the reference at your quantity.
- Freight for the shipment, at the delivery term named.
- Duties and taxes you will settle, if any.
- Payment and currency effects over the period the quote is valid.
- Allowance for short or faulty units, taken from your own recent record rather than a guess.
- Divide by the number of units the shipment contains.
The result is a cost per unit delivered to your door, which is the only number that can be compared with another supplier’s. Keep the working on one line per reference per quote, and the mixed-model order list is the right format for it, because a mixed order is where the comparison usually goes wrong.
What a quote has to state to be comparable at all
Before comparing numbers, check that the two quotes describe the same thing. A quote that omits any of the following cannot be compared on price, whatever it says:
- The catalogue reference and the artwork model text printed on the cell.
- The buying unit and what is inside it.
- The quantity per reference and the total.
- The price basis — which standard trade term applies, and to which place.
- The currency and how long the price is held for.
- The payment milestones.
- The delivery location and the expected timing.
- Packaging and the documents that accompany the shipment.
- The route for short, damaged or mismatched units.
The wholesale RFQ template is built so that each of these appears on the same line for every supplier, which is what makes the answers comparable later. The catalogue data guide covers the field level detail behind the first two of them.
Compare on the cost of a fitted battery
A repair business does not sell a cell, it sells a fitted battery, and the difference between two quotes often comes from what happens to the unit after it arrives: consumables consumed, handling time per job, and the small number of units that are returned because they did not fit. A quote that is 5% cheaper per cell can be the more expensive arrangement if the unit arrives without the consumables a technician needs, because the missing consumables are bought locally at a worse price and the bench time per job goes up.
The buying unit guide
covers which unit changes which of these, and the fitment checklist
and sample approval checklist
are how you establish the return rate rather than assume it.
What changes when the order gets bigger
Larger orders usually lower the unit price, and they also change three other things that a price-focused comparison ignores: the ordering unit may need to be uniform across the shipment, the minimum quantity per reference can force you to buy stock you will not sell this season, and the stock depth you carry ties up more cash while the stock planning guide shows how to size that cover against your own consumption.
The honest way to handle it is to compare the same order at two volumes and keep both answers: the price you would pay now, and the price you would pay if you doubled the quantity, with the stock depth each implies. That is a decision about cash, not just about price.
Eight questions when two quotes differ
- Is the artwork model text the same in both quotes?
- Is the buying unit the same?
- Which delivery term is named in each, and to which place?
- Which currency, and how long is the price held?
- Are the minimum quantities per reference the same?
- What is each quote’s replacement route for a faulty or mismatched unit?
- Which documents travel with the shipment in each case?
- Does either quote bundle references into a mixed carton, and what does that change for freight and for receiving?
Send the same eight questions to every supplier and put the answers next to the numbers, not instead of them. Reference pages such as the BN980 (4300 mAh, 3.88 V) and the BN985 (4500 mAh, 3.88 V) publish the artwork text and label values you should see quoted for the reference; the battery catalogue carries the rest of the range.
Send your model list, quantities and destination through the DoctorIT quotation page, and start from the wholesale batteries page if you are setting the terms up for the first time. Pricing, order minimums, timing and after-sales conditions are confirmed in writing for each enquiry and each shipment, against the scope you send.
Battery installation and handling should be carried out by trained technicians, and lithium-ion batteries must be stored, transported and disposed of in line with the applicable local rules and the carrier’s requirements.